Creality Glass Bed for CR-10S Pro/CR-X/CR-10 V2/Ender-3Max – 310x320x4mm
Only 1 left in stock
Creality Upgrade CR-10 tempered glass bed for CR-10/ CR-10S Series
Please Note: This surface is incredibly sticky at high temperatures for plastics such as PETG, PLA, and ABS. Once the print has finished, DO immediately try to remove the model from the glass bed with force!! If still unable remove after cooling, please heat the hot bed to 60c for several minutes then take it off slowly with a spatula。
This glass bed must come down to room temperature for the advanced surface to “release” the model. Attempting to forcibly remove the print from the glass bed at high temperature WILL DAMAGE the proprietary surface.
Please don’t clean the glass with any chemical liquid as the coating will be scratched, nor scratch the surface with the sharp. Just need to clean the glass with pure water.
Temperature settings for different filaments: 1. PLA:50-70ºC 2. Flexible filament: 50-70ºC 3. ABS:100-125ºC ( 110ºC is recommended ) 4. PC:100-130ºC ( 120ºC is recommended ) 5. Nelon:90-120ºC ( 110ºC is recommended ) 6. PP:100-130ºC ( 120 ºC is recommended ) 7. PETG: 50-70ºC :
We tested this by doing the following:
- INSPECTED FOR DAMAGE
- NONE FOUND
Works as expected:
Parts Included in box (only what is listed here is included):
- 1- GLASS 3D PRINTER PLATE
Notes about this item:
- Tested at: June 28, 2022, 5:16 pm
|Dimensions||15 × 14 × 2 in|
|Manufacturer Part Number|
|Number in Pack|
|California Prop 65 Warning|
|Notes||Open box, new item|
Only logged in customers who have purchased this product may leave a review.